Home » Supplies » Silicone Soap Molds

Silicone Soap Molds

Silicone soap mold is used in the production of soap handicrafts and handmade soaps. It has many excellent characteristics, such as good demold properties, good flexibility, durability, non-deformation, good quality of reproduction. It's widely used in soap handicraft industry.

Features of silicone soap molds
  • Good elasticity, good demold properties, very suitable for fine patterns and soft soap handcrafts.
  • High temperature resistance, high tensile strength, high flexibility, suitable for copying soap crafts, soap modeling realistic, with high success rate, do not change the element of soap.
  • Soap mold production process is simple, after molding and curing, silicone soap mold was translucent or white opaque.
  • Environmentally friendly, non-toxic, with stabile electrical property and chemical properties, resisting water, resisting ozone, non-aging, non-corrosive.
  • Low shrinkage, non-deformation, easy to use, easy to clean, long service life.
Silicone soap molds keyboard

Preservation method

To ensure that the silicone soap mold can keep good quality, it should be stored in clean and dry environment at room temperature, and avoid being squeezed.

Simple handmade soap making processes:

Silicone soap mold making bear
  1. Cut the soap base into small pieces and put it into a pot, then put the whole pot over another bigger pot with boiling water, keep low heat. When soap base is melted, remove from boiling water, stir soap liquid with a silicone scraper slowly.
  2. Add base oil (olive oil, colorless jojoba oil, avocado oil and sweet almond oil, 0.5ml each), still slowly stir soap liquid with a silicone spatula.
  3. Test PH value: Normally the PH test paper color should be green, and PH value is 7-9. If a lower pH value is desired, add a quarter of a piece of vitamin C dissolving in water (<2ml).
  4. Pour the soap liquid into silicone soap molds through a counting cup, use the silicone scraper to modify the surface, gently shake the soap mold up and down for about 5 to 10 times to help the bubble discharged.
  5. After a period of time, handmade soaps become freezing, strip from silicone soap molds.

Post a Comment:

Plz Calculate (5 - 4) =
(Your comment will show after approved.)

You may also like:

Aco Silicone Molds
Sales Email info@AcoSiliconeMolds.com

Featured Articles
Silicone Cake Molds Silicone Cake MoldsSilicone cake mold is a high-temperature baking silicone product which is made of food-grade silicone raw materials. It can be ...
Silicone Candle Molds Silicone Candle MoldsSilicone candle mold is mainly used to make the craft candles, festival candles and other candle products. Its raw materials are ...
Silicone Soap Molds Silicone Soap MoldsSilicone soap mold is used in the production of soap handicrafts and handmade soaps. It has many excellent characteristics, such ...
Silicone Ice Trays Silicone Ice TraysSilicone ice tray is a kind of very popular tableware. Silicone ice tray has the characteristics of environmentally friendly and ...